PLASTIC WASTE RECYCLING AND ITS IMPLICATIONS FOR SUSTAINABLE DEVELOPMENT IN MBARE, HARARE, ZIMBABWE

Rejoice Anna Chuma, Frank Chipfunde, Jemitias Mapira

Abstract


This study examines the alternatives for recycling of plastic waste and gives a general overview of the main environmental issues related to plastic disposal. It gives a rundown of the amounts and sorts of plastics in the waste stream and furthermore the primary impacts of recycling on the plastic material itself, the environment and also the national economy. The two main types of recycling are mechanical and chemical recycling. The research also compares the methods of recycling which are already in use and selecting the best in a bid to save the environment from pollution. The study also seeks to discover the challenges and benefits associated with plastic waste recycling. Questionnaires, interviews and observations were used to conduct the study. Data was analysed through hand tallying in the form of tables, graphs and pie charts. From the main findings, there is a lot of plastic waste in Mbare (Harare) because of the shortage of bins and an ineffective waste collection system. However, the plastic waste collection system should be complimented by the Harare city council which should register waste collectors and recyclers for incentives by signing agreement contract terms with them. Mbare has become the most ideal urban area to develop a waste collection centre as plastic waste has become a major problem.

 

Article visualizations:

Hit counter


Keywords


plastic waste, types, challenges, Mbare high-density area, Harare, Zimbabwe

Full Text:

PDF

References


Vijay Kumar Thakur, Manju Kumari Thakur and Asokan Pappu (2017). Hybrid polymer composite materials, Volume 2, Retrieved from https://www.sciencedirect.com/book/9780081007853/hybrid-polymer-composite-materials

Thamae, T., Marien, R., Chong, L. et al. Developing and characterizing new materials based on waste plastic and agro-fibre. J Mater Sci 43, 4057–4068 (2008). https://doi.org/10.1007/s10853-008-2495-3

Chanda et al. (2016). Plastics Fabrication and Recycling, 1st Edition, Page 216 and Technology Handbook, 4th Edition, Page 896.

Dodbiba et al. (2005). Progress in separating plastic materials for recycling. Physical separation in science and Engineering, 1910, 165-182.

Emsley et al. (2007). Sustainability of bio-based plastics: general comparative analysis and recommendations for improvement. Journal of Cleaner Production. Volume 23, pages 47-56.

Samuel Asumadu Sarkodie, Vladimir Strezov, Haftom Weldekidan, Ernest Frimpong Asamoah, Phebe Asantewaa Owusu, Israel Nutifafa Yawo Doyi (2019). Environmental sustainability assessment using dynamic Autoregressive-Distributed Lag simulations—Nexus between greenhouse gas emissions, biomass energy, food and economic growth, Science of The Total Environment, Volume 668, 2019, Pages 318-332, https://doi.org/10.1016/j.scitotenv.2019.02.432.

Goodship, V. (2007). Introduction to plastic recycling. GBR: Smithers, Rupra.

Gupta, R. K. (2017). Applied plastics engineering handbook, 2nd Edition. Chapter 29: Plastics in Buildings and construction.

Hamerton, I. (2003). An automated in-situ polymerisation procedure for multi-functional cyanate ester resins via ring formation. Polymer 2021, 228.

Jerie, S. (2018). The role of informal sector solid waste management practices to climate change abatement: A focus on Harare and Mutare, Zimbabwe. Department of Environmental Science and Engineering, Kunming University of Science and Technology, Kunming

Joseph. C. S. (2005). Concise Polymeric Materials Encyclopedia: CRC Press, New York

Kidder, L. H. and Fine, M. (1987). Qualitative and quantitative methods: When stories converge. Wiley Online Library.

La Mantia, F. (2002). Handbook of plastic recycling. iSmithers Rapra Publishing Retrieved from https://books.google.ro/books/about/Handbook_of_Plastics_Recycling.html?id=TBrOGJqvgcMC&redir_esc=y

Morgan, S. (2009). Waste Recycling and use, Evans Brothers Limited, London.

Palmeira, M. and Musso, F. (2020). 3Rs of Sustainability Values for Retailing Customers as Factors of Influence on Consumer Behavior. In Handbook of Research on Retailing Techniques for Optimal Consumer Engagement and Experiences (pp. 421-444). IGI Global.

Pappa G, Giannans C. (2001). The selective dissolution/Precipitate technique for polymer recycling: a pilot for unit application. Resource Conservation Recycling 34:33-34.

Siddique et al. (2013). Use of recycled plastics in concrete: A review. Waste Management. Pg 28, 1835-1852

South. A. R. (2018). Plastics: Facts and Futures: Moving beyond pollution management towards a circular plastics economy in South Africa. WWF South Africa, Retrieved from https://wwfafrica.awsassets.panda.org/downloads/wwf_plastics_report_final_2nov2020.pdf

Gideon Gywa Deme, David Ewusi-Mensah, Oluwatosin Atinuke Olagbaju, Emmanuel Sunday Okeke, Charles Obinwanne Okoye, Elijah Chibueze Odii, Onome Ejeromedoghene, Eghosa Igun, Joseph Okoro Onyekwere, Olayinka Kehinde Oderinde, Edmond Sanganyado (2022). Macro problems from microplastics: Toward a sustainable policy framework for managing microplastic waste in Africa, Science of The Total Environment, Volume 804, https://doi.org/10.1016/j.scitotenv.2021.150170.

Tucker. A (2002). Plastic waste: feedstock recycling, chemical recycling and incineration, 13(4). Rapra Technology, London.




DOI: http://dx.doi.org/10.46827/ejsss.v8i5.1475

Copyright (c) 2023 Rejoice Anna Chuma, Frank Chipfunde, Jemitias Mapira

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

The research works published in this journal are free to be accessed. They can be shared (copied and redistributed in any medium or format) and\or adapted (remixed, transformed, and built upon the material for any purpose, commercially and\or not commercially) under the following terms: attribution (appropriate credit must be given indicating original authors, research work name and publication name mentioning if changes were made) and without adding additional restrictions (without restricting others from doing anything the actual license permits). Authors retain the full copyright of their published research works and cannot revoke these freedoms as long as the license terms are followed.

Copyright © 2016 - 2023. European Journal Of Social Sciences Studies (ISSN 2501-8590) is a registered trademark of Open Access Publishing Group. All rights reserved.

This journal is a serial publication uniquely identified by an International Standard Serial Number (ISSN) serial number certificate issued by Romanian National Library. All the research works are uniquely identified by a CrossRef DOI digital object identifier supplied by indexing and repository platforms. All the research works published on this journal are meeting the Open Access Publishing requirements and standards formulated by Budapest Open Access Initiative (2002), the Bethesda Statement on Open Access Publishing (2003) and  Berlin Declaration on Open Access to Knowledge in the Sciences and Humanities (2003) and can be freely accessed, shared, modified, distributed and used in educational, commercial and non-commercial purposes under a Creative Commons Attribution 4.0 International License. Copyrights of the published research works are retained by authors.


 

Hit counter